Tracked undercarriage - fully proportional remote controlled standard
Wide Infeed Opening: 254 x 457mm (10”x18”), excellent for processing foliage, brushy and forked branches
Vertical Anvil: Anvil positioned vertically (rather than horizontally) to reduce knife damage caused by abrasive material.
Hydraulic Pump: Belt driven off the engine. Even if cutting disk is jammed, the feed roller can still be reversed for clearing the branch material.
Clutch: Easy starting with soft start technology. Simple and reliable. Auto tensioning belt drive system.
Pivot Outlet Chute: Outlet chute can be pivoted vertically by 260mm to suit your truck height or your desired outlet height.
Outlet: 360° rotating chute with deflector and a positive locking system. No tools required for adjustments.
Feed Roller: Pivot type, operates with less friction, moves forward and up to within 10mm of knives.
Feed Control Bar: Pull to feed, push for reverse.
Feed Table: Folds away and is locked when transporting the machine.
Auto Sensor Feed: Electronically monitors engine RPM and controls feed roller to suit. Auto feed is operator adjustable by push button, LCD screen displays engine RPM & hour meter. Auto reversing for quicker engine recovery. Feedroller jams are reversed and cleared automatically, eliminating manual reversing of feedroller if a blockage occurs.
Finish: Media blasted surface, zinc shielded and powdercoated (Hansa green or optional colour of your choice).
Warranty: 12 month warranty (conditions apply).
New Zealand made for New Zealand conditions.
When the job takes you to difficult sites, over rough terrain, narrow access or soft ground conditions, you need a machine that’s up to the challenge. The rubber track drive is operated by a fully proportional remote control removing the operator from the danger zone.
Designed for professional use by arborists, parks & reserves, local bodies, orchards and hire centres.
The powerful hydraulic feed system makes it easy to process any material. Its wide feed opening (18”) means bushy, twisted branches with forks are pulled into the machine without effort. You simply control the feedrate with the control bar and the rest is automatic. With the 360° rotating outlet chute the discharge direction can be changed within seconds.
Optional Hydraulic Winch
Take the back breaking work out of dragging branches by opting for the hydraulic winch with pulling power of 1800kg and freespool. Dyneema polymer rope is standard.
Controls include machine operated or wireless remote control function. Stabilisation legs provide additonal support.
Optional Hydraulic Lift & Crush
Great for additional down force to crush heavy foliage to aid feeding or quick clearing of feedroller jams by lifting the feedroller hydraulically.
Can be controlled from either side of the chipper.
Optional Transport Trailer
Custom transport trailer giving you the best of both worlds - a towable or tracked chipper all in one! Chip while on the trailer or track to site.
Infeed height while operating chipper on the trailer is still at an ergonomic height.
Specifications
General
Length
Width
Height
Weight
3015mm (table closed) or 3145mm (table open)
1370mm
2100mm (minimum)
1920kg (2050kg with winch)
254 x 457 / 10" x 18"
254mm / 10"
700mm
1550mm
960 x 650mm
Single roller, spring mounted, 305mm / 12" diameter
0 - 40m/min / 135fpm with flow control, full reverse
Features
When the job takes you to difficult sites, over rough terrain, narrow access or soft ground conditions, you need a machine that’s up to the challenge. The rubber track drive is operated by a fully proportional remote control removing the operator from the danger zone.
Designed for professional use by arborists, parks & reserves, local bodies, orchards and hire centres.
The powerful hydraulic feed system makes it easy to process any material. Its wide feed opening (18”) means bushy, twisted branches with forks are pulled into the machine without effort. You simply control the feedrate with the control bar and the rest is automatic. With the 360° rotating outlet chute the discharge direction can be changed within seconds.
Optional Hydraulic Winch
Take the back breaking work out of dragging branches by opting for the hydraulic winch with pulling power of 1800kg and freespool. Dyneema polymer rope is standard.
Controls include machine operated or wireless remote control function. Stabilisation legs provide additonal support.
Optional Hydraulic Lift & Crush
Great for additional down force to crush heavy foliage to aid feeding or quick clearing of feedroller jams by lifting the feedroller hydraulically.
Can be controlled from either side of the chipper.
Optional Transport Trailer
Custom transport trailer giving you the best of both worlds - a towable or tracked chipper all in one! Chip while on the trailer or track to site.
Infeed height while operating chipper on the trailer is still at an ergonomic height.
Specifications
Width
Height
Weight
1370mm
2100mm (minimum)
1920kg (2050kg with winch)
Type of fuel
Diesel
Hydraulic oil tank
100L
Speed
Track drive
Undercarriage material
Track / chassis width
5km/hr max, fully proportional
Remote control
Rubber
1200mm
Disk diameter
Shaft diameter
Knives
800 x 40mm
60mm
Four
Chipping capacity
Feed table height
Feed table length (to feed rollers)
Infeed chute opening
Roller style
Feed speed range
254mm / 10"
700mm
1550mm
960 x 650mm
Single roller, spring mounted, 305mm / 12" diameter
0 - 40m/min / 135fpm with flow control, full reverse
Degree of rotation
360°