CALL US ON (09) 238 3723 585e5102cb11b227491c33a4-744-862-208
cart Shopping Cart Reserve Cart
Hansa C30 Brush Chipper
larger imageMove mouse over the image to magnify
 
01937

Hansa C30 Brush Chipper

NZ $37,087.00
incl GST
Qty.

Features

  • Wide Infeed Opening: 330 x 178mm (13” x 7”). For foliage and brushy material, this wide infeed opening gives the chipper a capacity of a 10” to 12” machine with all the advantages of a 6” machine, e.g. Low weight and cost, and easy to manouvre.
  • Vertical Anvil: Anvil positioned vertically (rather than horizontally) to reduce knife damage caused by abrasive material.
  • Hydraulic Pump: Driven off the engine. Even if cutting disk is jammed, the feed roller can still be reversed for clearing the branch material.
  • Clutch: Easy starting with soft start technology. Simple and reliable. Auto tensioning belt drive system.
  • Outlet: 360° rotating chute with deflector and a positive locking system. No tools required for adjustments.
  • Jockey Wheel: Large solid wheel, height adjustable.
  • Light System: LED tail, brake and license plate lights, suitable for 12 or 24 volt system.
  • Feed Roller: Pivot type spring tensioned, operates with less friction, moves within 10mm of knives.
  • Feed Control Bar: Pull to feed, push for reverse.
  • Feed Table: Folds away and is locked when transporting the machine.
  • Auto Sensor Feed: Electronically monitors engine RPM and controls feed roller to suit. Auto feed is operator adjustable by push button, LCD screen displays engine RPM & hour meter. Auto reversing for quicker engine recovery. Feedroller jams are reversed and cleared automatically, eliminating manual reversing of feedroller if a blockage occurs.
  • Finish: Media blasted surface, zinc shielded and powdercoated (Hansa green or optional colour of your choice).
  • Warranty: 12 month warranty (conditions apply).
  • New Zealand made for New Zealand conditions.
     

    Designed for professional use by arborists, parks & reserves, local bodies, orchards and hire centres.

    The powerful hydraulic feed system of the Model C30 makes it easy to process any material. Its 7” x 13” wide feed opening pulls bushy and twisted branches with forks into the machine without effort. You simply control the feedrate with the control bar and the rest is automatic with the electronic automatic sensor feed system.

    Fuel efficiency is vastly increased by 50% with the 28.6HP Kohler two cylinder air cooled diesel engine in comparison to petrol powered equivalents. With the 40% higher torque of this engine, wide feed opening and the auto sensor feed system, this machine has an extremely high throughput, making this machine very popular among arboriculture contractors.

    If you have special requirements these can often be incorporated in the build of your machine. Options such as a cone holder, rake holder, spare wheel and road brakes can be manufactured to suit your operation. We will even powdercoat your machine in a colour of your choice!

    Specifications

    General Length (inlet table folded up)
    Width
    Height
    Weight
    3555mm
    1575mm
    2060mm (minimum)
    980kg
    Engine Make & model
    Type of fuel
    29HP Kohler air cooled
    Diesel
    Capacities Fuel tank
    Hydraulic oil tank
    45L
    20L
    Chassis Frame description
    Tires
    100 x 50 x 3mm RHS
    13" wheels
    Cutting System Disk speed
    Disk diameter
    Shaft diameter
    Knives
    1800RPM
    650mm x 32mm
    50mm
    Two
    Feed System Feed opening
    Chipping capacity
    Feed table height
    Feed table length (to feed rollers)
    Infeed chute opening
    Roller style

    Feed speed range
    178 x 330 / 7" x 13"
    160mm / 6"
    700mm
    1550mm
    960 x 650mm
    Single roller, spring mounted, 220mm / 8.7" diameter
    0 - 40m/min / 135fpm with flow control, full reverse
    Discharge System Discharge height
    Degree of rotation
    2060mm - 2200mm (adjustable)
    360°
    Brakes Hydraulic road brakes Optional

     

You might also be interested in ...

Hansa C27 Brush Chipper
NZ $31,050.00
incl GST
Hansa C60 Brush Chipper
NZ $52,900.00
incl GST
Hansa C60RX Tracked Brush Chipper
NZ $105,800.00
incl GST
Hansa C13 Brush Chipper PTO Driven
NZ $4,995.00
incl GST
     
Contact Us

STIHL SHOP Pukekohe
16 Wrightson Way
Pukekohe 2120
Auckland

585e5102cb11b227491c33a4-744-862


btn send message